Pilothole Bit Services / Transco Manufacturing Distributor
Pilothole Bit Services is a USA Distributor
2018 TRANSCO placed inventory into Lafayette USA in partnership with Pilot Hole Bit Services including a full range of TRANSCO medium and hard rock HDD Hole Opener bodies, HDD Reamers and cutters.
Transco is a well known manufacturer with a reputation second to none. Instead of having 3 separate reamers for 3 different formations, with Transco you can just change out the cutters from Mill-tooth to TCI or PDC and you are back to work in minutes. Gone is the worry and expense of having 2 or 3 reamers on the job for backup! Transco is API and ISO certified.
Contact us for a quote for Drill bits or Transco HDD Reamers for your next project. You will be glad you did!
Roller Reamers

TRANSCO Manufactures a large range of roller reamers
To suit all types of raise bore rig configurations. Transco can also cater to any customers customized requirements All Transco manufactured rollers are subject to stringent quality checks and each piece is supplied with full document packages incl. material certificates, Non destructive testing certificates, machining certificates against traceable serial numbers.
Body • Forged Integral body • Precision machining in a single milling set up on CNC • Including API float bore recess in the box end • Mud flow directed across cutters to eliminate formation packing ad keep cutters cool and clean • Dressed with either TCI or Milled Tooth cutters Cutters • Patented cutter offset roller design increases side wall contact and eliminates tendency to lobe in hole • Magazine style cutter cartridge requires only two allen keys to remove assembly from the reamer body • Cutter cartridges can be changed easily onsite • Cutters designed to ream up and down (bi-directional) • Cutter assemblies can be fitted with elevator blocks to increase reaming size • Greased sealed bearing package For 6.5" to 26" holes
Give Pilothole Bit Services a call at 337-446-3230 so we can help with your next project.
Stabilizers (Rotating & Non-Rotating)

TRANSCO Manufactures a large range of high strength and standard strength rotating stabilizers To suit all types of raise bore rig configurations. TRANSCO can also cater to any customers customized requirements All TRANSCO manufactured stabilizers are subject to stringent quality checks and each piece is supplied with full document packages incl. material certificates, Non destructive testing certificates, machining certificates against traceable serial numbers. From 9" - 42" including near bit stabilizers & Non-Rotating stabilizers from 15" x 42" and above
Give Pilothole Bit Services a call at 337-446-3230 so we can help with your next project.!
Up-Down Reamers / Hole Openers

TRANSCO designs & manufacture custom up-down reamers and hole openers to suit all configurations and applications.
Where applicable utilising Transco patented cutters and retentions systems With custom cutter profile layouts to suit specific formations All TRANSCO manufactured reamers / hole openers are subject to stringent quality checks and each piece is supplied with full document packages incl. material certificates, Non destructive testing certificates, machining certificates against traceable serial numbers.
Give Pilothole Bit Services a call at 337-446-3230 so we can help with your next project.
Specialized Down Hole Tools

TRANSCO works with its customers to assist in the methodology and manufacturing of various specialized down hole tooling incl. junk mills, recover tools & wash over tools
TRANSCO's success as a business is the experience, capabilities and willingness to undertake custom product design and manufacture of drilling equipment from project methodology to a completed product.
Give Pilothole Bit Services a call at 337-446-3230 so we can help with your next project.
Hole Openers

 TRANSCO Designs and manufactures a very large range of H.D.D hole openers to suit any of your requirements. From hole openers to suit midi HDD rigs to Maxi Rigs in both Integral and fabricated body. TRANSCO designs and manufactures all hole opener components with the exception of carbide inserts, seals, some bearing parts and raw steel. That gives us the ability to change any aspect of our tool design if required for special purpose applications. Before making cutter design changes to improve performance there must be a standard or baseline and a good reason for the change. TRANSCO has been making high quality HDD drilling tools since 1998. Our existing tools qualify as baselines. We developed a method for describing, analyzing and comparing cutting structures of different diameter tools made by different manufacturers that allow us to make logical changes and anticipate the results.
Give Pilothole Bit Services a call at 337-446-3230 so we can help with your next project.
Cutters

Cutters designed for soft or hard-formations to ream rock up to 200 mpa plus harnesses.
Cutters – field changeable with patented fail safe retention system.
Give Pilothole Bit Services a call at 337-446-3230 so we can help with your next project.
Fabricated Style Hole Openers

Transco Manufactures fabricated body hole openers from 26" through to 72' plus hole size, dressed with Transco Manufactured field replaceable cutters featuring Transco's patented cutter retention system Components are manufactured to API Spec 7-1 4145H specification with mandrel steel ex AISI 4145H certified alloy bar All connections cut in accordance to API . Transco made the first smooth barrel hole openers for drilling in large hard cobbles and hard broken formations. The smooth barrel surface would not hang up on broken formation and falling rock. The result was reduced torque, smoother operation and more efficient drilling. These advantages carried over into all types of formations drilled. Transco made this the standard body design for all its hole openers 26” and over in 2007. Additional advantages were noticed as more holes in varied formations were drilled. The stabilization of the barrel gave straighter holes. The large smooth area of the barrel does not dig into the bottom side of the bore during stationary rotation – fewer key seats. The barrel hole opener makes smoother borehole walls than traditional hole openers causing less friction for the product pull and allows a reduced reamed hole size to product pipe ratio in competent ground. TRANSCO barrel hole openers drill faster, straighter, smoother and longer bores with less torque than any other hole opener on the market.
Give Pilothole Bit Services a call at 337-446-3230 so we can help with your next project.
Integral Style Hole Openers

TRANSCO Manufactures integral hole openers from 12" through to 36" hole sizes, With Transco Manufactured field replaceable cutters featuring Transco patented cutter retention system Components are manufactured to API Spec 7-1 specification with body steel ex AISI 4145H certified alloy forgings All connections cut in accordance to API .
Certified AISI 4145 H one piece forged body construction – no welding Fully machined body and cutter attachment system Hydraulic system – jets to cutter gauge, up hole and diffusers under cutters Proven T.C.I., Milled Tooth and PDC cutter designs available
Available in single or multi staged bodies to 42" and above with custom cutter profile layouts to suit specific formations All TRANSCO manufactured hole openers are subject to stringent quality checks and each piece is supplied with full document packages incl. material certificates, Non destructive testing certificates, machining certificates against traceable serial numbers.
Give Pilothole Bit Services a call at 337-446-3230 so we can help with your next project.
SRHO Series Hole Openers (Small Rig Hole Openers)

The SRHO series hole openers present qualities that are expected when using TRANSCO tooling such as; • On hole opener bodies 12” through 44” diameter all cutters are interchangeable between body sizes. • Low torque and smooth reaming • Jets to gauge and jets to each cutter. • Performs well in broken ground conditions. • Heavy ring stabilization machined for concentricity and hard faced for maximum wear resistance. • Each torque arm includes a wash out port recessed into the ring to allow for easy washout of used bentonite or drill cuttings. • Field replaceable demountable cutters. • Torque arms can be fitted with picks or paddles to further agitate cuttings slurry. • Cutters are all sealed bearing, TCI, mill tooth or PDC suitable and interchangeable for soft, medium and hard formations. Mandrels are machined from certified AIS4145H material.
Give Pilothole Bit Services a call at 337-446-3230 so we can help with your next project.
Field Replacable Cutters

Our Patented Replaceable Cutter System Has Been Proven Effective since 2002 in HDD Bores All Over the World and Since 2010 in the North Sea Oilfields
Due to TRANSCO's quality assurance obligations it is the only entity to service Transco bits and cutters returned for rebuild
8" Cutter size common to 17" Diameter hole opener bodies up to 22" Hole size 10" Cutter size common to 23” diameter hole openers and above for fabricated and integral body hole openers 14" Cutter size common to large body hole openers 32" Diameter hole openers and above High speed bearings.
Give Pilothole Bit Services a call at 337-446-3230 so we can help with your next project.
Fly Cutters

TRANSCO'S open ring style fly cutters can be manufactured single or bi-directional with and array of cutting elements Replaceable tungsten picks, hard-faced paddles and hard-face clay claw cutters to suit various formations All sizes and connection configurations available Transco can also cater to any customers customized requirements All Transco manufactured fly cutters are subject to stringent quality checks and each piece is supplied with full document packages incl. material certificates, Non destructive testing certificates, machining certificates against traceable serial numbers.
Give Pilothole Bit Services a call at 337-446-3230.